The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
8Forums
195,000+Topics
1,276,000+Posts
10,000+Members
Notifications
Clear all
Forum 24
21
Posts
5
Users
0
Reactions
24
Views
Topic starter
25/09/2019 2:50 pm
Another ambitious project...
One of the lot of four WCPD models that I recently won on eBay for a dang good price. Pretty bad paint rash on the hood and top of the fenders of this one but, other than that, in very good shape. I've got one of these in excellent condition already so, I thought I'd see if I can fix this one. I sanded the hood and top of the fenders, masked off the rest of the model, primed and painted it, and it STILL looked like crap. So, I'm stripping those areas down to the metal, re-priming and have some Model Master gloss black I'm gonna spray on. I haven't ever tried to repaint a die cast, so any advice would be welcomed.
photo no longer available
photo no longer available
photo no longer available
25/09/2019 3:09 pm
I use Eastwood Self Etching Primer...
It bites right into the Zamac, and your final finish will hold up quite nicely.
26/09/2019 4:30 am
Caution!!!
Eastwood SE primer is awesome. However, you should then put on a barrier coat of primer. Self-etch has acid in it. That's what bites. Certain pigments will react negatively with this if there is no barrier coat. I worked for Eastwood and know about all the chemicals and paints. Duplicolor Primer Sealer is good. #1699.
Rick Hanmore did a concept model for me at TFM. Over time, the paint crazed badly. Just be aware!
Topic starter
26/09/2019 4:33 am
Thanks for the advice. Another question...
... Should I use black or gray primers?
26/09/2019 5:28 am
Depends on your top color.
Light colors, I use light primers. Dark, black primer. On white and yellow colors, I use a white primer. I make plastic cards from sheet styrene. Spray the primers and when dry, the color coat. Then compare outside, when dry.
Topic starter
26/09/2019 6:35 am
Thanks, George....
...pretty much what I've always done when painting plastic models, but wasn't sure about die cast. I'm repainting this one black, so I'll get the black etching primer. So far, I haven't found the duplicolor primer you recommended anywhere locally.
26/09/2019 7:29 am
* * * GEORGE * * * ... What awesome information - Thanks Dude
26/09/2019 11:32 am
Just look for a Primer-Sealer. I got this at Autozone.
26/09/2019 1:58 pm
You are very welcome!
Eastwood was a fun place to work. I've purchased a lot over the years so I felt it was a natural. Went there to learn how to weld. It was on my bucket list! Go figure!
As for the etch primer, one of our Chassis Black paints even had a disclaimer on it regarding etch primer and Chassis Black. Just as a simple measure, please use a barrier coat. I always did and my models are still holding up like the day they were done.
I'll see if I can find the concept model pic that Rick did...
26/09/2019 10:49 pm
Have not gotten any article lately ... Any info?
27/09/2019 2:00 am
I just sent one out this week!
Be sure you didn't unsubscribe! A couple of guys hit that button and "poof"!
27/09/2019 3:44 am
Well ..... *$%#@%* ... If you sent it - I missed it .... How do I get it again??? ... SORRY !!!
harley phatboy at ya whooooo
27/09/2019 3:57 am
George's website?
Please post your website as I would like to subscribe and support.
27/09/2019 7:23 am
27/09/2019 7:26 am
I do a private list.
anyone here can hop aboard! Just need an email. Send to: gbojaciuk@comcast.net
No cost!
Page 1 / 2
Next