The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
Same here Joel. That is why I use a digital camera and set it to AUTO with the flash off. I bought one of those free standing work lights at Home Depot to set the light levels myself. I just keep moving the light closer or farther away until I get a picture quality I like. It's extremely "low tech" but it works.
Toby, I agree with what you said.
Most lenses are optimized at the high and low end to get acceptable photos...the true "Sweet Spot" is usually in the middle f-stops.....But this is a trade off. If you want maximum focus from front to back of the photo, you must use the highest f-stop available.
Another thing is how you can eliminate blur with more speed. This is another trade off because speed and high f-stops do not mix unless you have a lot of light or can reset your ISO to a higher number. Another trade off as the higher ISO will increase grain or noise.
As you mentioned, you can put the camera on a tripod and try to eliminate any human contact with the camera when the shutter trips to minimize camera shake or vibration.
I've taken a lot of pictures of cars and smaller items such as model airplane engines or n-scale trains and have not used a tripod yet with my digital camera. I do have a lot of experience so I can usually find a way to stabilize the camera when I need to. One of these days I'll break out the tripod and see what my camera can really do for sharp focus.
Some people will "Poke" the shutter release with their finger and wonder why they get blurry pictures. You should think of your hand as a caliper and grip it so that your thumb applies an equal and opposite force to your shutter release finger, like a crab claw.
If you are fairly new you should always use a tripod and set the delayed shutter release so you can click it and then remove your hand so vibration will be minimized.
I like sunlight when I'm trying to get a pure white background and often use "Fill Flash" to bring out shadow areas. Flash falls off very quickly from front to back of a typical close up shot but sunlight goes forever. Sun angle at various times of the day can greatly effect your shadow areas.
Each type of lighing can cause problems. incandescent light bulbs have a different kelvin rating than sunlight and can give a yellowish cast, while florescent can give a green tint or other wierd effects. Many digital cameras have white balance which will allow you to doctor-up your photos afterwards to obtain the right color mix.
Experimentation is the only way you will ever learn how your camera, or more importantly, your "techniques" will work out.
I used to carry at least two 35mm cameras when covering a model airplane event to make sure I got acceptable photos. Nothing like shooting a 4-day event and then finding out you had a problem with your camera and ended up with nothing. A back up film type camera gave some insurance of having some duplicate shots, should you need them. With a digital camera you can see your shots immediately and can instantly correct any mistakes and reshoot the picture.
This is getting wordy and I haven't even scratched the surface...Learn as much as you can about the basics of cameras, lenses, lighting and composition. Then it is a simple matter of making minor adjustments.
USAF 1958-62