The Diecast Zone · Model Car Club Since 1994

Diecast Collector Forums

Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.

8Forums
195,000+Topics
1,276,000+Posts
10,000+Members

Much better, and ov...
 
Notifications
Clear all

[Closed] Much better, and overall a nice color, image combo-Supercars '70 Challenger T/A

14 Posts
2 Users
0 Reactions
50 Views
(@Christopher Novak)
Joined: 1 second ago
Posts: 0
 

Much better, and overall a nice color, image combo-Supercars '70 Challenger T/A

I passed on the black Supercars (h-61 mold) Challenger T/A as I
felt you could'nt see the tape stripes as well, especially the bold,
and
in your face "340 SIX PACK" front fender appliques. I'm glad I
waited. My new, just arrived B5 blue T/A is a real step up from
even
my purple AAR cuda. They got the color right, and the shape of the
body looks very good. Not too sure about the shape of the roof,
and top of front windshield, but it could be right. the rest of the body
shape is very convincing, and the fit of doors, hood, trunk, and front
and rear details is tight for a model at this price point. the front grill
sports a
photo etch center section. the fiberglass hood is very nice, and I'm
sure they left the underside open due to plastic tooling
shortcomings rather than a design flaw. but it's hard to see this
except at one or two angles. Otherwise the hood is a nice feature
that keeps the feel of the racer for the street look these cars had.
they have the correct optional front valance spoilers, and the rear
spoiler has the correct tape stripe "Challenger T/A" on right side.
interior is very nice with all the expected details, I have only two
beefs. 1 the dash sits way too low, and looks very odd when you
compare to a photo of a real car (or compare to your real car if your
lucky enough to get one before the prices went over $40k). And 2
the pistol griop shifter is nice, but a little bit of paint to add the
chrome center metal frame, and the shift pattern detail on top of the
pistol grip would have been a real cheap way to exhibit some
quality details.
Engine is good, and about the same as the previous AAR's, but not
a lot of added details. But it was pretty good for this price point
anyway. Best of all, they have the rear wheels in the correct
location in rear wheel wells, so on the shelf it's a very satisfying
image of one of my all time favorite cars. Get one, until someone
does a more expensive model of these, this is the best there is.



   
(@Ben Valdevarona)
Joined: 1 second ago
Posts: 0
 

I had the B5 T/A on pre-order and hadn't planned on getting the black one either. But, while looking for pix of the real car on the net, I found some of the car in the triple black scheme. It looked real cool to me, sort of a 'stealth' T/A, so I bought one too.

I think I'm going to tone down the grill. It seems too bright.



   
Rich Sufficool
(@rich-sufficool)
Illustrious Member
Joined: 6 years ago
Posts: 17694
 

You're right about the grill, Ben.....

I'm going to apply thinned matte black and see how that looks.
Do either of you guys think the shifter handle is a bit out of scale?
I don't remember the pistol grip being that large.
Anyway, it's an awesome looking car. My gripes are the prominant mounting sockets on the undercarriage as well as the "stick and loop" steering mechanism. Both stick out like sore thumbs on a side view. I wish they'd just dump that quarter-round display case concept and just put those puppies in styrofoam clamshells.



   
(@Steve Massaro)
Joined: 1 second ago
Posts: 0
 

I agree Rich, H61 produces................

great images but the well detailed chassis are ruined by the mounting posts. The biggest problem with the boxes, for me, is the difficulty in stacking. Usually, after stacking more than 6, they topple over.



   
(@Ted Slezak)
Joined: 1 second ago
Posts: 0
 

Manufacturing error...

"1 the dash sits way too low, and looks very odd when you
compare to a photo of a real car (or compare to your real car if your
lucky enough to get one before the prices went over $40k)."

I looked at my B5 T/A and found the dash to be the same way - too low. This is some sort of assembly error. The Citrona Yellow 440 R/T that I got earlier looks to have the dash installed correctly, but the Hemi Orange one I got at the same time as the B5 T/A also has the dash mounted too low as well.



   
Rich Sufficool
(@rich-sufficool)
Illustrious Member
Joined: 6 years ago
Posts: 17694
 

Well, that explains the shift lever looking too high....(pics) 'cause the dash is too low.
I was looking over Revell's Challenger R/T diecast kit which, although only 1/25 has an overall accurate look about it and there definitely is a difference in the dash position that looks a heckuva lot better. Revell's grill is also more accurate in its blackened color.
photo no longer available
photo no longer available
photo no longer available
Here's the grill:
photo no longer available
No big mounting posts on the undercarriage either:
photo no longer available
Not a bad engine compartment either
photo no longer available
and... it's under $20
photo no longer available



   
(@Ted Slezak)
Joined: 1 second ago
Posts: 0
 

But mine's even worse...

The dash in your T/A is closer to the right height than the dash in mine. The bottom of the steering wheel is nearly touching the seat in mine.

I might have to do some surgery on mine to see if I can correct this. I'll probably try it on the Hemi Orange one first to see how much of an effort it will be to reposition the dash.



   
(@Christopher Novak)
Joined: 1 second ago
Posts: 0
 

Ted, let me know how this goes. If not too tough I'll try it.



   
Rich Sufficool
(@rich-sufficool)
Illustrious Member
Joined: 6 years ago
Posts: 17694
 

That yours is worse is a hopeful sign.

It means that the dash is not locked into that position by design but suffers from poor assembly. Once disassembled, you should find a better way to remount it



   
(@Ted Slezak)
Joined: 1 second ago
Posts: 0
 

Frustrated...

I tried removing the chassis last night to see what it would take to remount the dash. I removed the six screws I could see, but the chassis wouldn't budge from the body.

I didn't want to break anything so I stopped. If anyone has information on how to successfully seperate the chassis from the body on these, or can point me to the info, I'd be much obliged.



   
(@Christopher Novak)
Joined: 1 second ago
Posts: 0
 

TED, I did it, and dash looks great, but it ain't easy

You have to remove the rear valance panel. Mine was already
broken. the panel is glued into bosses on chassis, but my model
had one side broken here. the chrome bumper rib crossign over
the panel was holding it in place. So I figured to glue the panel
back in after I removed the chassis. you have to be carefull of the
front hood latch bracket molded to top of radiator support, this
needs to be cleared of the front part of frame,and front valance,
then the front molded frame ends on chassis need to clear the front
valance, I bent the chassis a litttle to get these to clear. then it's a
real B$%^& to clear the trunk parts away from the rear, but if you
remove the rear vlance, it's easier. But WATCH THOSE LITTLE
CHROME SPEARS ON THE REAR BUMPER!!!!! I broke on off!
Dang............. The dash os held in with two screws that also hold
the front windshield in place. YOu have to thin down the two tabs
that hold the dash to the bosses then extend the holes carefully to
make the dash sit a bit farther into the interior, then bend them
slightly up at the outer ends, this makes the dash tilt upwards when
installed,. Mine looks great. now I have to carefully epoxy the rear
valance, and that Chrome spear back on. I know I could have
avoided breaking the spear, but the valance has to be pulled out,
and or broken at it'smount to remove, or you can't do the job. Be
very, very careful.



   
Rich Sufficool
(@rich-sufficool)
Illustrious Member
Joined: 6 years ago
Posts: 17694
 

LOL.... I'm starting to really like the position of my dash now.

Thanx for the advice and the warning. I think I'll just heed the warning. How did your dash look compared to mine? Ted says his is much lower than mine.



   
(@Christopher Novak)
Joined: 1 second ago
Posts: 0
 

Richard, mine would have to be considered a floor mat rather than a dashboard..................



   
Rich Sufficool
(@rich-sufficool)
Illustrious Member
Joined: 6 years ago
Posts: 17694
 

Ouch!! That puppy needed serious fixin'.....

I'm glad it worked out for you at least reasonably well.



   
Share: