The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
DM '69 Trans Am arrived in Queens, N.Y. Wooooo Hoooo
This is a MUCH WELCOMED addition to my ever growing fleet, and I am happy to have added it! For those that are tired of '57 Chevys, and the INFAMOUS "played out" '69 Camaro, we now have a precision 1:24th Pontiac Firebird that blows all other versions (69 Camaros that is) out of the water. This model had raised a new mark for details, and it's really amazing what can now be done in our 1:24th scale. My example arrived as perfect as these cars can get. If I wanted to be a little picky, the drivers door gap on the leading edge is a little larger then the passenger side. Both doors open and close perfectly though, so I'll ignore this and keep it! The 1:1 69 Camaros and Firebirds were far from perfect and didnt have the best gaps either so in that way it makes it all the more realistic. I've noticed that DM is now using a different type of door hinge then they have previously used. I first noticed this on their Yellow 96 Vette Z06. It appears to be just like that on GMPs Grand National model. It's unique in that it's not doglegged AND it doesn't articulate as was the case on other DM models. Examples are all the 57 Chryslers, DeSoto, Esdel Wagon (rear doors), etc... If you've ever taken a door panel off one of these cars you'll see that I mean. There is a little rod and a two pieces hinge system inter-locked (for lack of a better term). When one opens a door, the door actually moves open and OUTWARD. By outward I mean that the door slides AWAY from the hinge point slightly. SOme of you may have noticed that to close the doors on your New Yorkers or 300s you have to push the door inwards slightly as you close it. This is because the hinge is a little tight and is not "loose" enough. With the New type of hinge as on the Trans Am, 96 Vette and GMP Gran National there appears to be a stationary pivoting point hidden deep inside the jamb pillar. The inboard edge of the door folds around this making a solid, and precise hinge arrangement. Being I first noticed it on the GMP model, I'd have to give credit to them. What ever the case maybe, I think this is the BEST type of hinge so far. The earlier articulating ones are good, but sometimes get loose or are too stiff and cause problems. Other areas of praise on the DM Trans AM are the hood hinges and trunk hinges. The trunk hinges are very realistic and the two "legs" are actually moulded to the trunk lid rather then a separate piece that is peened on as is the case with most of our other little cars. Hood hinges are precision type complete with little springs and all, just like a 1:1! GREAT
AS mentioned before, the aircleaner lid is fitted with REAL soft foam on its top surface to replicate the ram air gasket, nice touch! If I had to criticize any thing, it would be the tires. They are generic and also look a little puny to my eyes. Aside from this, the model is a real gem and a MUST HAVE!
Phil, I gotta concur with you on the T/A 'Bird......
I was'nt expecting it as I have been ordering and buying DM
Dodge
Chargers like beers at a frat party, but The preview society felt the
need to help me out of my rut. I find absolutely no flaws, and it
looks great, Almost makes me want to claim to be a Poncho
fan......... But your right about those tires. They look a bit too fat, and
low profile??? Perhaps the guys who know Pontiacs, and
especially Firebird Trans Am's could tell us if these look ok?
DM has hired a tire consultant.....
an infallible authority.....a lady as a matter of fact. her name is
Madam Ming. She is very meticulous about detail and gave her
blessing to these tires. Who knows, she may end up as a
consultant in the computer business next!!!!
That T/A is an outstanding car and t subtly raises the bar on
diecast....kinda like the Mercury Montclair and the upccoming '50
Studebaker...only different. DM cars are becoming even more
jewel-like than ever. Amazing!!!!
Tom, Warn DM, Madame Ming is a spy working for the Taiwan diecast mafia she is most likely trying to infiltrate the American diecast industry to
steal secrets. I'll bet she knows less about tires than you do about
interstellar luminescent gas dissapation inside nebulous star post
cataclysm debris fields. But thanks for the info.
ROTFLMAO!!!!!!!!!!!!!!!! : ) lol whatever the case maybe, it's a spectacular diecast and the tires are a minor issue. Just as a point of info, I highly doubt that ANY tires comes/came with a plain, solid blackwall without ANYTHING stamped on it??? EG: tire size, 225 G15, or FIRESTONE, Powerstreak etc... the tires on the TA are as generic as a plain unaddressed envelope! LOL
Don't forget to open the center console!
I think Madam Ming is sleeping in your barn...or garage...
or the spare room over the haystack of your palatial manse on
Goombah Street......she's always there.....no matter what you
believe...
My fourth one arrived yesterday..............
It is supposed to have been checked by a supervisor. The truth? Same problems as before.........Crooked front seat backs,fender molding that don't fit properly to the fender lips, uneven door gaps and trunk that don't close tight because of the spoiler.
I give up with that one. Compare with the new Dodge Charger 500 and Corvette coupe I received two weeks ago and whose details are crisp with sharp assembly and fit, this one is a piece of junk and far from a precision model as I am accustomed from DM.
Anyway,glad for everybody that are not bothered by these evident and major flaws.
I think if you look carefully...
you will find the trunk closure problem may be the result of the
spare tire moving around inside the trunk. I had the same
problem....so I relocted the tire on its shelf inside the trunk, and
closed the trunk lid to find NO GAPS. The tiny gaps at the front
doors are necessitated by the needs of the new door hinges.
These hinges are stronger, more realistic, and less prone to
problems down the road.
The seats are mounted on posts sprouting from the floor pan on
each side of the console area. They are the way they are and,
without seeing the 4 examples you've had, the mounting is rfeal
straightforward. The seat backs on mine are pretty straight up...a
little tilted but then, the seats in the real car were like that. It
certainly is not enough to get shook about.
With all due respect, after 4 examples of this magnificent model
(I'm not the only one who regards this image so highly), the
problems you speak about are more dillusions of mind than facts
on a diecast scale model. The model is a work of great design and
execution that is meant to please and excite the senses. You have
taken this to a point of obsession...and that, sir, is, to say the very
least, unhealthy. I suggest your problems lie in another arena far
away from the difficulties you seem to note in this model.
I hope you will take this criticism in a the positive manner in which
it is sent.....TL
AAAAAAAAAHHHHCHOOOOOOOO!!!!!!!
Guzundtheit!!!!!
You could try a tiny dab of "KRAZY GLUE" GEL......
There are several of these glues on the market. This stuff comes in
real handy. The only thing is that you gotta have is great eyesight
and a sharp toothpick!!!!!