The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
Help Needed: Taking digital photos...
I have a Minolta DiMage A1 Camera which has worked well in photographing small items and collectibles. However, I have a hard time taking pics of dark diecast cars such as metallic reds and dark greens. The cars just come up as dark and dead..even with a good flash and lots of light. White cars and reflective items look great in pics.
What should I do to improve?
Try taking pictures of darker cars against a dark background
If you have a light background, the camera may be picking up on the background instead of the darker car. With the darker background, your camera's light meter should work better. Also, if your camera can focus up real close, try taking a picture with just the car in the picture.
A suggestion. I've had the same problems on occasion. The easiest way to improve the shot is to shoot it outdoors so that there are many highlights and the lines of the model will show better. Outdoors also offers more even lighting buthot sunlight will kill the shot too. Open shade is best against a medium-toned background. Realizing that it may be snowy where you are, then inside is the obvious choice. (Snow will reflect too much light.) But, if you have to shoot it inside, then lots of even lighting (other than flash) will be needed in order to get the highlights.....again using a medium-toned background. The key is to keep almost everything in the frame around the car, as low in light-reflection as possible. If at all possible, don't use flash. Sorry that I can't comment on your camera......I just don't know it, but I suspect it's lighting not the camera that's the problem.
As David said, abundant, diffuse lighting is the key.
I've never been a fan of using the flash when shooting die-cast cars, since it creates harsh shadows and can play havoc with the depth-of-field (where the front of the car is in focus, but the rear section is all blurry).
Taking a cue from the world of swimsuit photography, (I saw the "Making of the Sports Illustrated Swimsuit Issue on the telly recently) you can try using a diffuser/reflector to put a bit more light on the subject...pun intended.
You may have seen pro photographers use the round nylon reflector discs (hand-held by assistants) to put more light onto the models. I've done something similar, with fairly decent results.
Since I don't have the pro-style reflectors -- nor an assistant to hold them! -- I built two small "walls" out-of-frame by using several Danbury Mint boxes. Don't laugh...they're white, fairly reflective, and close to hand!!;)
I'd show you some of the results, but for a hard drive crash that put the knockers on most of my digital photos.:((
Michael, You can play with sunlight as the angle moves throughout the day.
Noon time the sun is overhead...then it drops toward the horizon as the day goes on. Late afternoon sun will give a yellowish tint.
I often use sunlight with "Fill-Flash" to bring up detail in shadow areas. When using a sheet of poster-board placed under your car and curving up a wall will give a smooth, uninterrupted background and sunlight will light the background as well as the foreground. Flash by itself will often fall off and the background will be too dark.
The main thing is to use your "Macro" setting to get in the right focus range.
Set your camera on "Aperature Priority" and use the highest f-stop for maximum depth of field focus.
Angles of a car can make or break a picture..don't be afraid to move around and take a lot of shots. You can dump the duds later. Sure beats paying for developing pictures you don't want.
Read your camera manual and make sure you do what it says.
Experiment, experiment, experiment.
Good luck, digital photography greatly enhances your appreciation of these little gems.
USAF 1958-62
Pictures of dark cars
I like to use a couple of high-intesnity lights rather than flash, as it allows me to play with the highlighting before taking the picture.
I have a DiMage 7. Does your's have the exposure lock? If it does, zoom in so that the car fills the finder, then meter and hold that reading (usually by holding the shutter release on the first stop while you compose the shot.
Try using a neutral background - not real dark or real light to provide contrast with the car.