The Diecast Zone · Model Car Club Since 1997
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
How to remove unknown spot on Diecast windshield
I have a '69 DM Mustang with a unknown spot in the center of the windshield. The car is perfect except for this. Looks like maybe a water spot. I haven't tried to remove for fear of doing more harm. I don't really know if it is on inside or outside. Please give me any ideas how to remove.
Mike, use polish for plastics.
If on the inside, use foam tip cleaning swab to reach it with the plastic polish.
I personally use Mothers plastic polish, but any brand will work.
First try a drop of water on a Qtip lightly pressing on the spot
Then use the dry side of Qtip to dry the spot. Try outside first as its easier to get at. If spot still is there and you think it might be inside try the same thing inside. If the dab of water doesnt remove spot then go more agressive using a plastic polish . All you need is a dab of it!! Take care not to knock off inside rear view mirrors, side view mirrors, avoid snagging wipers etc.
Water? Didn't think about it, I have all sorts of solvents on my desk ...
... alcohol wipes, thinners, polishes, but no water, I guest I can always spit on it;) ... I just assumed something simple was already tried.
Plastic polish with microfiber cloth is very safe on the windows, but may fade the chrome frames if the polishing is too aggressive. If it goes in the gaps, blow it out with compressed air before it drys.
Spot on windshield
Thanks!!
Spot on windshield
Thanks!
Chav I like to start least aggressive !! Just like talking to ones mother in law!!!
😂😂😂😂😁😁😁😁😃😃😊😕😕😳😳😰😰😰😡🔫🔫🔫🔫🔫 lol