The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
Pete R. Question for you ..... when buying metallic paint for these models .....
What do they do to get the metallic flake to scale??? I know if one just uses a rattle can from Autostore the metallic flake will be too large. What do I ask for ????
+?? (good question)
I have a friend in the biz who mixes my paint. He uses a combination of fine and medium metallic.
This is automotive paint, two stage. The color coat is water base.
Thank you Pete great information.......it DOES sound pricey tho.....reading between the lines,it sounds like your clearcoat is NOT water based.....any reason for that ?..
....I have about 5qts of this stuff to use up (EMTECH EM6000 WB Production Lacquer)
how about primer?
Wasn't there a web site where you could get model paint in factory colors?
Where the metallizer has a finer grain.
I've used rattle can DupiColor and had nice results but I can't guarantee to color you want will give similar results
Not sure about that Richard.
Since this is automotive paint, the clear coat can't be waterbase because it wouldn't hold up in the weather. Virtually all modern cars for years have been painted with a waterbase color coat and solvent based clear coat. It has to do with the EPA's limits on VOCs emitted into the atmosphere.
It's a solvent based catalyzed primer sealer. If I have to do body work, then I use a catalyzed filler primer, then the primer sealer over that.
The Rockbird had a lot of body work as did the Edsel Villager so those required a filler primer and guide coat and lots of block sanding to get the bodies straight. It's just like doing body work on a full size car on a smaller scale.
photo no longer available
photo no longer available
photo no longer available
photo no longer available
photo no longer available
Thanks Pete
Try MCW Finishes.
Thank you again Pete
thanks Pete
Thanks Rick.