The Diecast Zone · Model Car Club Since 1994
Diecast Collector Forums
Eight forums, every scale, and thirty years of shop talk — new arrivals, restorations, reviews, and the finds you won’t see posted anywhere else, with the full archive back to 2002 restored and searchable. Free to Register.
Question on display lighting. I finally broke down and purchased an oak cabinet to convert into a display case. I should be able to display upwards of 100 cars in it when I'm done. I want to put some lighting in it, and I remember some posts a while back that discussed various lighting techniques. Mainly, I'm more intersted in the type of light source (halogen, incandescent, etc) than anything else.
What's the safest light source to use (i.e. won't degrade/fade paint). The light won't be on all the time, but I want to make sure I'm using the right source.
Appreciate any feedback you may have.
RIck probably the safest way to go is .............
Florescent, although they can be a bit bulky and some people don't like the type of light they emit. They do, however, run "cool" so heat build up and damage isn't a factor. If you use incandesent lighting, use low wattage as not to build up heat. As for Fading concerns, make sure to have glass infront of halogen type bulbs. This will block the UV rays which is what actually does the damage and fading. I'm no expert on lighting, but this may help you. LED (light emitting diode) technology has come a LONG way, and there are now many type of LEDs available that may work for your application. They run cool, don't emit any UV rays, and last virtually forever. The down side is to get enough of them, and in the right combination to serve your purpose it may be a little costly. Best of luck!
Suggestions
T-8 fluorescent lamps are thin and shorter than standard fluorescent lamps. Halogen emits a great deal of heat. All lamps are rated to a scale of 100, 100 being the closest to natural sunlight. LED is also a good choice. Try going to a buisness in your area that builds showcases for retail stores and see what they use. Find a really good lighting store that sells a lot of different products and ask questions. They might have something that could be ordered. Most large hardware stores like Home Depo sell strip lighting for book shelves which emit little heat and can be connected together as well as can be dimmed. That would be my choice.